Actifilter DB™

Unikat Actifilter DB

Unikat Actifilter  is a new particulate system (DPF) which efficiently removes particulate from diesel exhaust gas and also functions as a silencer. The collected soot (PM) is burnt off using an integrated diesel burner while the vehicle is at idle in 20 minutes. The filter is mounted horizontally in the exhaust system in place of the original silencer. A control unit is installed on the vehicle close to the particulate filter and is connected to the engine's fuel return line and to the engine's battery (24V).

Regeneration takes place in a controlled manner. At a preset backpressure or preset operation time a dash mounted display indicates to the driver that it is time for regeneration. The vehicle is then driven to a suitable place for regeneration, the engine is left to idle and regeneration is initiated by pressing a button on the display unit.

OPTIONS. An adapter 12 VDC - 24 VDC for connection to 12 V electrical system. The Actifilter DB can also be combined with CDTi oxidation catalysts for the reduction of the gaseous pollutants carbon monoxide (CO) and hydrocarbons (HC).

The filter material is the same as is used in the Combifilter which is tested and approved for use in environmental zones and conforms to the German standard TRGS 554.

Actifilter DB

  • Based on silicon carbide (SiC), the strongest and most heat resistant material available.
  • Removes particulate from diesel exhaust gas, PM, with 96%.
  • Functions independent of exhaust temperature and operation.
  • Functions independent of diesel fuel sulphur level.
  • Regeneration time 20 minutes depending on filter size and amount of collected soot.
  • Can be combined with catalyst EZ or AZ.
  • An adapter 12 VDC - 24 VDC can be used for connection to 12 V electrical system.
  • Now available in 7 sizes.

Product leaflet




Copyright Engine Control Systems. All rights reserved. Unauthorized duplication of materials in this site is prohibited.